This dimmable LED driver from Mean Well is suitable for the LED panels 60W 60x120cm.

• This makes it possible to dim 60W LED panels.
• This is the easiest way to dim LED panels, because no control current wires are needed. This way, the existing light point can be used and the existing switch can easily be replaced by a dimmer.
• The maximum number of panels to be dimmed depends on the maximum load of the chosen dimmer. For example, when 5 LED panels of 60W are used, a dimmer with a maximum power of at least 300W is required. We recommend not to dim more than 450W of load.
• Each panel needs a dimmable driver. You can easily connect this to the LED panel using a terminal block or lever clamps.
• The dimmable LED drivers are supplied separately. In some cases, the plug of the panel may need to be removed and connected to the driver by yourself. You can easily connect this to the LED panel using a terminal block or lever clamps.

Specifications dimmable LED driver Mean Well

• Model: PCD-60-1400B
• Input: AC 180-295V, 47-63Hz, max 0.6A/230VAC
• Output: 25-43V 1400mA 60.2W
• IP:30
• PF: >0.9
• Flicker free
• Dimmable by means of phase/triac phase cut-off dimmer
• AC phase cut-off dimming
• Built-in active PFC function
• Cooling by free air convention
• Fully insulated plastic housing
• Warranty: 3 years